Plane slag machine
Slagging welding machine is used to plane the welding seam after butt welding so that the welding seam is flush with the base metal.
I. technical data
1. Rated input voltage: 3-380v
2. Rated input frequency: 50Hz
3. Rated input capacity: 50KVA(when sharing a hydraulic station with slager and end cutter)
4. The maximum clamping force is 9T
5. The maximum planing force is 9T
6. Rim width of machining wheel is 400mm
7. Rim thickness is 10mm
8. Rim diameter is 450~800mm
9. The production efficiency is about 4 pieces/min
10. Welding with cutting tools
11. Working pressure: 16MPA
12. The total power is 23KW
13. External dimension: 3570x680x2300(LxWxH)
14. The weight of the machine is 7T
Roller mill
The welding seam rolling machine is used to flatten and strengthen the welding seam after slagging. After rolling, the welding seam is flush with the base metal.
I. technical data
1. Rated input voltage: 3-380v
2. Rated input frequency: 50Hz
3. Rated input capacity: 50KVA(when sharing a hydraulic station with slager and end cutter)
4. The maximum clamping force is 9T
5. Maximum rolling pressure: 9T
The cutting machine
The end welding machine is used to cut off the excess burr at both ends of the welding seam. After cutting, the end faces of the welding seam and the base metal are flush.
I. technical data
1. Rated input voltage: 3-380v
2. Rated input frequency: 50Hz
3. Rated input capacity: 50KVA(when sharing a hydraulic station with slager and end cutter)
4. Maximum cutting force: 50T
5. Machining rim width 400mm
6. Rim thickness is 10mm
7. Rim diameter is 450~800mm
8. The production efficiency is about 4 pieces/min
9. Working pressure: 16MPA
10. The total power is 23KW
11. External dimension: 2755x600x2935(LxWxH)
12. The weight of the machine is 7T